AntMiner L3+/L3++ 3.8.8 Release 3.8.8. This firmware is the best that there is at this time among the software for mining bitcoin on ASICs. It was originally developed in early 2017 for its own mining farms. Time-tested and installed on more than 1 500 000 BITMAIN AntMiners. It first became generally available in early 2018. And the most important thing! WITH THIS FIRMWARE YOU WILL BE ABLE TO REDUCE YOUR ANTMINER'S CONSUMPTION to 95W at 1TH in old models S9 / T9 and 35W at 1TH on new models. Install and upgrade firmware via Awesome Miner. Display of current power usage and ASIC chip performance. The Antminer firmware features can be accessed via Awesome Miner. Operations can be performed on a large number of miners at once. Use Awesome Miner for free when running the firmware with a 3% mining fee. Learn more and download . Download firmware. Custom NiceHash Firmware for Antminer L3+ and L3++ features: Preset overclock profiles - up to 715 MH/s! Improved power efficiency; Manual fan contro Antminer L3+/L3++ v. 1.02 (Hacked - no Blissz fee!) AntMiner L3+ Installation Guide.pdf: AntMiner L3+ Manual AntMiner L3+ Installation Guide: Antminer-L3+-201708251737-384M.tar.gz: AntMiner L3 Firmware - 2017-08-25 Support L3+ miners Remove the function: post mac address and remote stop mining interfac Firmware for Antminer L3+/L3++. https://asic-firmware.com/how-to-install-l3-firmware-by-sd-card/. Crazy Mining company released software (firmware) for L3+/ L3++ asics on the Scrypt algorithm, which allows to increase the machines hashrate up to 640 MH/s, with reduction of electricity. L3+/L3++ firmware by Crazy Mining allows you to overclock.
Antminer L3+/L3++ Free custom firmware will allow you to fully reveal all the features of your miner! The development board is no more than ~ 1.8% of the total hash rate Custom Firmware for all Antminers, Baikal mainers, Innosilicon mainers. Efficiency: 40-45% (Better then Blissz firmware! Better then AsicFW.io) Recommended, at your current firmware, set the miner frequency at minimum and set your fan speed manual at 25% before flashing. Download the custom firmware. (dont unpack it Antminer L3+ Blissz v1.02. Upgrade instructions: Recommended, at your current firmware, set the miner frequency at 350mhz before flashing. Download the custom firmware. (don't unpack xxx.tar) Flash by going to System -> Upgrade -> Flash new firmware image and select the custom firmware Professional firmware VNISH for overclocking Antminer S9/S17/T17/T9+/L3+ For more than 3 years the VNISH team has been developing firmware for Antminer ASICs. At the moment you can download the firmware for Antminer S17 + T17 + S17 S17pro T17 S9 S9i S9j T9 + L3 + L3 ++ Use the SD card to restore the miner's program, and this method only applies to L3, L3 +, L3++ miner. Applicable in the following Issues: the miner is power-off in the upgrading process. The miner can not start (can not find IP). The miner accepts only default workers. Requirements: computer running Windows XP system or later; card reade
If you own an L3... Today we are turning our #Antminer L3+ into a L3++ by upgrading the firmware. This is a how to, but I will also talk about my mixed results Click it and a new Change ASIC Firmware context window will pop-up. Then click the Select firmware dropdown list and choose the appropriate firmware version. In this example it'll be the Antminer-S9-all-Hiveon (the process will be the same for L3+/L3++, just make sure you choose the appropriate file) The mskminer.com AntMiner S17 / S17+ / S17e / s9 / s9i / s9j / T17 / T17+ / T17e / T9+ / L3+/L3++ firmware is suitable for all models. The first custom firmware with AsicBoost S9 saves up to 250 watts in pools supporting AsicBoost technology (slushpool, antpool, emcd.io, btc.com, f2pool and others)
Firmware/overclocking Antminer L3+ 504 mh HOW? Looking for somewhere to learn how the firmware and overclocking works so I can attempt to optimise my 2 l3 units, but I've never over locked a thing in my life, help! 35 comments. share. save. hide. report. 67% Upvoted. Log in or sign up to leave a comment Log In Sign Up. Sort by. best. level 1 · 21d. Greetings! First up, Overclocking is a. Before installing the sd card in L3+/L3++, de-energize it. Then wait for diodes start to blink, the firmware from the SD set for 3 minutes, after blinking the red and green lights, turn off L3+ and remove the SD card, hold down the reset button and turn on the power while holding the reset button until diodes start to blink at the same time Exclusive Firmwares for. ANTMINER S9, S9D, T9+, S17, S17+, S17E, T17, L3+. Boost the effectiveness of your Antminer devices and reduce electricity costs! Download now! Find out more on Telegram
Antminer L3+ running Bitmain firmware from July 2019 - requires SD-card to install Antminer S17/T17 running Bitmain firmware from December 2019 - requires SD-card to install Antminer S17+/T17+ - requires SD-card to install To install the firmware via Awesome Miner, go to the toolbar: Tools -> ASIC Tools -> Update firmware It is a 1 Step process that will not only load the latest Blissz for the L3+ and L3++ over any firmware, but will also bypass the Cannot Find Signature error that prevents you from loading the image if you have one of the newer Antminer firmware that block 3rd party firmware. Just load onto your SD card, start your miner, count to 30 or wait until lights turn green, turn miner off and remove SD card and turn miner back on. THAT'S LITERALLY IT! I built this SD card image specifically for. Antminer L3+ with firmware from AsicFw.io 650 mh/s at 1050 w in light overclock mode. (maximum safe overclocking)The increase in power is about 30%.Free cust... (maximum safe overclocking)The. Litecoin. You will get the latest and the best existing Blissz custom firmware for Antminer L3+ and L3++ (v1.02 stable, No Dev Fee)! Plus addition files and a text file with full, simple instructions to get past the Cannot find Signature error when updating firmware if you have the 2019 Stock firmware installed View Bitmain's Range Of Asic Bitcoin Miners And Buy Online With Bitcoi
Antminer L3+ Bitmain firmware from July 2019 or later; Antminer S17, T17 firmware from December 2019 or later; Antminer S17+, T17+ To install the firmware via Awesome Miner, go to the toolbar: Tools-> ASIC Tools-> Update firmware. The firmware can be selected from a list and Awesome Miner will automatically download and install the firmware on. Folge Deiner Leidenschaft bei eBay Antminer L3+ Blissz Modified Firmware For Improved Performance. If you are a miner using Bitmain's Antminer L3+ Scrypt ASICs for mining Litecoin (LTC) or another Scrypt-based altcoin you might be interested in checking out the Blissz modified firmware for the L3+. A while ago we have covered the Antminer D3 Blissz Modified Firmware For. We continue to expand the lineup of Hiveon ASIC firmware powered by MSKMINER, and today we are glad to introduce our universal firmware for Antminer L3+ and L3++. Keep reading to discover th
Antminer L3+ Blissz Modified Firmware For Improved Performance. 14, Jan 2018. If you are a miner using Bitmain's Antminer L3+ Scrypt ASICs for mining Litecoin (LTC) or another Scrypt-based altcoin you might be interested in checking out the Blissz modified firmware for the L3+. A while ago we have covered the Antminer D3 Blissz Modified. Antminer L3+ and L3++ do not heat too much even on stock firmware. But with the Hiveon ASIC firmware they heat even less. So much less that the need for liquid cooling simply disappears. And if.
Antminer l3 with firmware from asicfw.io 580 mh/s at 820w in light overclock mode at factory power consumption power gain 20% alternative firmware for antminer l3 /l3. Source: www.bitmart.co.za. Hiveon firmware for other asic models like s9k/s9se are coming soon, so stay tuned! Bitcoin forum > alternate cryptocurrencies > mining (altcoins) > antminer l3+ blissz firmware (14/01/2018 v1.02. Antminer L3+ Firmware Mod - t17 - Asic Club : Antminer l3, l3+,l3++ (all versions).. Custom firmware for antminer to increase efficiency and improve functionality. L3+ firmware by crazy mining allows you to overclock l3+ models in 3 modes Today we have the last l3+ update where we find to find a more efficient and cooler setting for summer. 1.support blacklist feature during updating firmware. Antminer L3+ firmware won't update I've been trying to update my L3+ firmware for the past couple of days, but everything I've tried has come up with nothing (just trying to update to the newest Bitmain firmware at the moment - may go for something different as needed)
Custom firmware is designed to safely overclock and optimize Antminer. A familiar and convenient web interface with a wide range of additional features of thin automatic and manual settings that allow you to fully open all the capabilities of your miners! Thanks to ASIC BOOST, energy consumption is reduced by an average of 15% and increased productivity. Using custom software you will increase. Topic: Antminer L3+ Blissz firmware (14/01/2018 v1.02 stable) (Read 5227 times) blissz. Sr. Member Offline Activity: 336 Merit: 257. Antminer L3+ Blissz firmware (14/01/2018 v1.02 stable) January 05, 2018, 01:01:55 PM. Merited by kebabman (3), OgNasty (1) #1. WARNING THIS FIRMWARE MIGHT VOID THE WARRANTY ON YOUR MINER v1.02 :: 14/01/2018 :: L3+ recommended update Download: temporary removed. Since the introduction of the Antminer S9, Vnish has become a leading mining software company. We have developed firmware for all popular antminer models and now we have started developing software for such equipment as Whatsminer, Innosilicon and Avalon. More than 1.5 million devices successfully work on our software and we are grateful to you for choosing us. Welcome to the Vnish family
Awesome Miner firmware for Antminer L3+ 126.96.36.199: 2%: No - Consumes an Awesome Miner license: Awesome Miner firmware for Antminer L3+ 188.8.131.52: 3%: Yes - doesn't consume any Awesome Miner license: Awesome Miner firmware for Antminer S17, S17 Pro: 1.0.0: 3%: Yes - doesn't consume any Awesome Miner license : Awesome Miner firmware for Antminer S17, S17 Pro: 1.1.0: 3%: Yes - doesn't. MD5:80cbb845f5b034429c4ff7ef5b3c3381 Release Notes : 1. Enhance anti-virus capability. 2.T9+ user firmware. It is only for 7010 xilinx control board, not for C5. Antminer L3+ Bitmain firmware from July 2019 or later; Antminer S17, T17 firmware from December 2019 or later; Antminer S17+, T17+ To install the firmware via Awesome Miner, go to the toolbar: Tools-> ASIC Tools-> Update firmware. The firmware can be selected from a list and Awesome Miner will automatically download and install the firmware on.
Various Firmware for Antminer L3+ (Blissz, Awesome Miner, VNish) I'm about to go down the rabbit hole of putting new firmware on my Antminer L3+. It's currently not running properly - it hashes for about 30 seconds then stops. The existing firmware is from 2014, I think so want to try some other firmware. Now strangely enough there is no update. Antminer firmware is installed using the special. Antminer L3+ for mining Scrypt - 504 MH/s hashrate and 800 W power consumption. ASIC can be used for mining 35 different coins. Use minerstat and start managing and monitoring your Antminer L3+ with our ASIC monitoring software. Start now. Antminer L3+ specs. Release. June 2017. Size. 18.8 x 13 x 35.2 cm. Weight. 4.4 kg. Chip boards. 4. Chip name. BM1485. Chip count . 288. Noise level. Antminer L3+ Blissz Modified Firmware For Improved Performance. If you are a miner using Bitmain's Antminer L3+ Scrypt ASICs for mining Litecoin (LTC) or another Scrypt-based altcoin you might. ATTENTION: Firmware is working with Antminer L3+/L3++ !!! If you see the message: can not find signature when you flash the asic with VNISH firmware you need to take off bitmain software protection. This message means that your asic has BITMAIN firmware 2019 year that has overwrite protection. If you have BITMAIN firmware 2019 you can remove the protection using the SD card image (all files. Additionally, from mixed user reviews it seems that it is no more than a firmware upgrade for the L3+. Antminer L3+ Review Summary. Litecoin ASIC miners are hardware components dedicated to mining the Scrypt algorithm. Based on the BM1485 chip is Bitmain's Antminer L3+, a newer version of the Antminer L3. The Antminer L3+ is way ahead of the competition when it comes to hashrate VS power.
Cable connection of hash board: Antminer L3+ has four hash boards and each board has 2 PCIE intefaces, and each shall be connected with a 12V PSU cable, in total 9 pieces of 12V PSU cable. Note: there's no difference in using which cable to connect with which interface. Just keep in mind to plug it in with right direction, namely the direction of buckle. If errorly operated, hash board may. Antminer's user interface has been carefully designed keeping the needs of our users in mind. After you have accessed the Antminer's user interface, all you need to do is to enter your wallet address and mining pool settings to start mining. The user interface also allows you to customize certain settings and to upgrade to new firmware.
Bitmain Antminer L3+ Firmware security vulnerabilities, exploits, metasploit modules, vulnerability statistics and list of versions (e.g.: CVE-2009-1234 or 2010-1234 or 20101234) Log In Registe ANTMINER S19 SERIES. The next-generation of Antminers. The Antminer 19 Series (Antminer T19/S19/S19 Pro) are the latest models from the Antminer brand. Designed with new custom-built chips and a new software interface, the 19 Series achieves industry-leading hash rates AntMiner S9/S9i/S9j 3.8.6. Release 3.8.6. This firmware is the best that there is at this time among the software for mining bitcoin on ASICs. It was originally developed in early 2017 for its own mining farms. Time-tested and installed on more than 1 500 000 BITMAIN AntMiners AntMiner L3+ is one of the devices among them dedicatedly built for Litecoin (LTC) mining, which became popular due to its brilliant hash rates. In this post, you will learn about the specifications, costs, and a brief review of Bitmain's AntMiner L3+ device. Now let's have a hands-on review of the robust mining machine. So Table of Contents. What is AntMiner L3+? What unique features. Details about Antminer L3+ L3++ Blissz Firmware v1.02 NO DEV FEE CANNOT FIND SIGNATURE FIX SSH See original listing. Antminer L3+ L3++ Blissz Firmware v1.02 NO DEV FEE CANNOT FIND SIGNATURE FIX SSH: Condition: New other (see details) This packet was made by me.
Bitmain Antminer L3+ Blissz Firmware Efficient Scrypt Miner 520Mh/s. Miner is much quieter and more efficient using the Blissz firmware. The input power is around 700 watts at 240VAC input. If you want to go to original Bitmain firmware it should be easy to do, but it will not be as efficient (MH/s per watt). Miner comes with a 2kw 240VAC input, efficient 12V server power supply and homemade. Antminer Firmware Update - February 2019. February 28, 2019 / ADMIN /. At Bitmain, security of end users is our top priority and we are committed to ensuring this as new risks emerge. Our team closely monitors the technology ecosystem to identify new and evolving threats. As part of that vigilance, we have recently been made aware by the open. Antminer L3++. Scrypt. 580 MH/s. 940W. Innosilicon A6 LTC Master. Scrypt. 1.23 GH/s. 1500W. お断り：このデータは、minerstat対応機能のみを示しており、実際のマイニングハードウェアが提供している機能とは異なる場合がありますのでご注意ください。
BITMAIN AntMiner S17+ NH firmware. Antminer L3+ for mining Scrypt - 504 MH/s hashrate and 800 W power consumption. MSKMINER.COM were the first to create alternative firmware for Antminer S9, T9 +, L3 + with subtle automatic chip tuning, which increase profitability by 20-30% with better energy efficiency. Mining profitability for any device found on this site may not be up to date and may not. Antminer S17-S17pro-v.1..8.tar.gz MD5 hash 7a6d089ea3f54c25526026434615c9f4. Antminer T17-T17pro v.1..8.tar.gz MD5 hash 24d102093164fe66c1ddcafb6d35997
香港現貨 原廠保養，包電源 官電加$800 可以尖沙嘴試機 另托管服務，L3+$1300/月, s9 $1800/月 852-66861014 Jeff. World wide shipment welcom world's first zwminer 5.0.0 for Bitmain's Antminer L3 and L3+. Buy The Powerful Antminer L3+ ASIC Litecoin Miner Software - Bitmain Zwilla Mo Firmwares. These are firmware files we think you may find useful. Bitmain Antminer 17 series: Antminer S17/S17 Pro Antminer S17+ Antminer T17/T17 Pro Antminer T17+ Bitmain Antminer S9 series: Antminer S9 Antminer S9 LPM. Bitmain Antminer L3+ series: Antminer L3+/L3++. Hi guys, todays i show to you how to restore bricked Antminer L3+. Last night, my Antminer L3 +, decided not to work by leso Last night, my Antminer L3 +, decided not to work by leso Fix Antminer L3+ Firmware — Steemk
Contribute to bitmaintech/Antminer_firmware development by creating an account on GitHub Antminer L3+ (Reconditioned) Bitmain's L3+ is one of the most affordable models to start in the mining industry. This machine is similar to the Antminer S9 format, in a box that consumes half the energy. It is also possible to make modifications to the machine at the firmware level which allows it to reach an efficiency as low as 1.25W/MH
ANTMINER L3++ 600+MH/S Blissz Firmware Upgrade with APW3++ Power Supply - $723.65. FOR SALE! USED L3++ 600+mh/s scrypt asic miner comes with Bitmain APW3++ PSU (no 30393177325 Unpacking ASIC firmware: AntMiner Exploited. Published at May 18, 2019 - 10 min read. Introduction. Experts say cryptocurrencies (such as Bitcoin, Monero, and Ethereum) will be the protagonists of the future decentralized and distributed economic system. If this is true then one of the most debated topics in the field of cryptocurrency, how to verify payments while spending as little as. Прошивка для разгона Antminer L3+ и L3++ (firmware) Прошивка от организации GetAsic сформирована для осуществления безвредного разгона следующих устройств от компании Bitmain: Antminer L3+ и L3++ (VNISH). В материале.
Bitmain Antminer L3++ Release date Jan 2019; Manufacturer page Antminer L3++ Scrypt 596.00 Mh/s @ 1050W Order now at Sesterce Order now at MiningWholesale. Most profitable coins for Antminer L3++ Power cost $/kWh. Name(Tag) Algorithm Market Cap Volume Est. Rewards Est. Rewards 24h Rev. BTC Rev. 24h Rev. $ Rev. 24h Profit Profit 24h; Nicehash-Scrypt Scrypt -8.98 BTC 0.000216 0.000219 0.000216 0. ANTMINER SALES OFFER THE LOWEST PRICES ON BITMAIN MINERS . The most profitable mining hardware. Shop Now. Most Popular Bitmain Miners. Quick View. Antbox. Price 14.500,00€ Add to Cart. Quick View. Antminer S17+ (76 TH/s) Price 6.995,00€ Add to Cart. Quick View. Antminer T19 (84 TH/s) Price 7.250,00€ Add to Cart. Quick View. Antminer S19 (95 TH/s) Price 7.495,00€ Add to Cart. Quick View. Also note that this modified firmware does come with a 1.5% developer fee built-in, though the improvements it might being are definitely worth the dev fee and if you do not like what you get you can always get back to the stock Bitmain firmware. - For more details and to download and try the Antminer L3+ Blissz modified firmware Antminer L3+ is a Scrypt algorithm mining equipment sold by RedBag Technologies. It is able to mine Litecoin (LTC) with a maximum hashrate of 504,000,000H/s for a power consumption of 800W. The $475 USD price includes the PSU ATTENTION: Firmware is working with Antminer L3+/L3++ If you see the message: can not find signature when you flash the asic with VNISH firmware you need to take off bitmain software protection. This message means that your asic has BITMAIN firmware 2019 year that has overwrite protection. If you have BITMAIN firmware 2019 you can remove the protection using the SD card image (all files you.
How to make a antminer L3 L3+ A3 D3 chips fixture production tutorial. Repairing hash boards and testing fixtures are essential tools. It can quickly and effectively locate the faulty chip, thus getting rid of the bulky oscilloscope. The principle of the test fixture is: send the test signal to the hash board. If the chip of the hash board is damaged, the test signal will stop transmitting on. Antminer-L3+-vnish-184.108.40.206.asictuner.tar.gz Antminer-R4-xilinx-vnish-3.8.6-asictuner.tar.gz Снятие подписи для S9/T9+ ( Cannot find signature This listing is for a link to software to enable you to install Blissz v1.02 (No DEV FEE version) firmware to any Antminer L3+ and L3++. It also contains software and instructions to easily remove the Cannot find signature firmware lock that is installed by newer manufacturer firmware. This will allow the installation of 3rd party firmware Buy Antminer L3+ L3++ Blissz Firmware v1.02 NO DEV FEE CANNOT FIND SIGNATURE FIX SSH from only $3.25 You will get the latest and the best existing Blissz custom. L3, L3 + and L3++ Control Board Program Recovery - Bitmain . This is a SD Card Image, it is a 1 Step process that will not only load the latest Blissz for the L3+ and L3++ over any firmware, but will also bypass the Cannot Find. Antminer L3+ L3++ Blissz Firmware v1.02 NO DEV FEE CANNOT FIND SIGNATURE FIX SSH | Coins & Paper Money, Virtual Currency, Miners | eBay
BITMAIN Antminer L3+ 800Watts 504MH/s ASIC Litecoin Scrypt Miner. Sent with Australia Post Standard Parcel. Postage cost will be calculated depending on delivery address . This is another one of my machines purchased new by me. Well looked after and works well. Machine will come with PSU. Upgraded with the Blissz software for beter tuning Antminer L3+ (600Mh) Description. Model Antminer L3+ (600Mh) from Bitmain mining Scrypt algorithm with a maximum hashrate of 600Mh/s for a power consumption of 850W. Profitability . Period /day /month /year; Income: $8.10: $242.86: $2,914.37: Electricity-$2.62-$78.62-$943.49: Profit: $5.47: $164.24: $1,970.89: Algorithms. Algorythm Hashrate Consumption Efficiency Profitability /day; Scrypt. How to use Antminer L3+ chips test fixture (chip test stand). Bitmain antminer and other ASIC miner repair software download. Antminer S9 control board down frequency repair firmware. Xshell5 and USB driver[Choose PL2303](For test fixture S9 and L3+). Bitmain Antminer S9 temperature sensing files. Antminer S9 Test Fixture TF Card File Antminer T9+ Test Fixture TF Card File. Bitcoin rig hash.
Antminer S9 firmware Antminer T9 firmware Antminer R4 firmware Antminer L3 firmware Antminer L3+ firmware. Source code on. Antminer S19j Pro - 100TH/s $ 2,800.00 Shipping Date: 22-07, May. 2021 Add to cart. Products Antminer S19 - 95TH/s $ 2,500.00 Shipping Date: 22-07, May. 2021 Add to cart. Products Antminer S19j - 90TH/s $ 2,300.00 Shipping. Firmware for AntMiner S9, S9i, S9j. 4. See All. Posts. Asicdip.com. April 30 at 12:57 PM · New release custom firmware for Antminers S9, S17, T17, L3+ www.asicdip.com # antminer # antminers9 # antminers # bitmain # antminerl3 # antminers9j # antminers9i # antminers17 # antminert17 # antminers17pro # antminers17plus # antminers19pro # antminers19 # antminers19pro110th # antminerfirmware. Der Antminer L3++ ist die neueste Version des Antminer Scrypt ASIC. Es gibt jedoch noch ältere Versionen im Angebot. Es gibt zwei Modelle der Vorgängerversion, den Antminer L3+, die mit 850W mit einer Hash-Rate von 600Mh/s oder 800W für 504Mh/s laufen. Es ist wichtig zu prüfen, ob das Netzteil beim Kauf des Antminer L3+ oder L3++ enthalten ist oder nicht. Modelle, die direkt von Bitmain.